Overview

Balloon Tube Pre-stretching Machine TSC-3150 is an auxiliary process for balloon formation . it is used to stretch the non-formed parts on both sides of the balloon tube so that the balloon can pass through the terminals on both sides of the balloon mould . It can also ensure the stability of balloon production and reduce the wall thickness of the balloon pins on both sides .

When producing balloons with a diameter more than 3mm , the diameter of the balloon tube is usually larger than the ID of the terminals on both sides of the balloon mould , so it is necessary to stretch the balloon tube at both ends in advance to make the OD smaller before going through the balloon mould .

Technical specifications

• Dimensions                                                 1300*500*350mm

• Power supply and insurance                      220/240VAC 50/60Hz 5A (1100 watts)

• Air source input                                          compressed air 0.7MPa

• The number of tube stretched.

  can simultaneously stretch 3 balloon tubes of the same specification

• Control system

  The touch screen sets parameters and switching modes , pneumatic clamps and pneumatically driven heaters ,and dual servo motors with lead screw .

  Operation control accuracy 0.01mm

• Stretching stroke                                         300mm left and right

• Stretching speed                                          Max. 200mm/s , min. 1mm/s

• Set parameters

  Temperature ,left and right stretching distance ,speed , no stretching length ,cooling time .